What To Do When Heat Pump Doesn’t Run?

But if the heat pump of yours does not begin at all, there’s an issue with the device or maybe the thermostat getting energy.

Do the following:

1.  Make sure the thermostat is set to the appropriate environment

(“Heat” when you are wanting the temperature and heat) you would like the space to become. When the thermostat was replaced recently, the brand-new thermostat might be the incorrect sort – it should be especially a heat pump thermostat. Or perhaps, it might have been wired incorrectly. An improperly wired thermostat can easily fry electronic elements, stopping the heat pump from functioning right.

2.  Make sure the heat pump is getting power.

The 2 circuit breakers which protect the electric circuits providing strength to the air handler as well as the heat pump condenser might have tripped.

Check the primary power panel and any subpanels which supply power to the device. In case a circuit breaker has tripped, reset it by flipping it to Then and off to ON.

Whenever the circuit breaker trips once again, there’s most likely a brief in the power system offering strength to the furnace. Call an electrical contractor (go to HomeAdvisor).

3.  If the high-temperature pump is attached to a power switch,

both on the wall close to the product or within the air handler box, be certain it’s left turned on (many do not have switches). But it’s switched off, change it on and hold out a couple of minutes because of the air handler to interact with.

4. If the heat pump of yours has electric components which offer supplemental heating because so many do, the circuit breakers or even fuses that guard the heating element might have tripped or may be blown. They’re typically placed within the air handler box. Reset them.

HomeTips Pro Tip: Opening up the box of any heat pump and dealing with electric regions might be risky for the new. When you do not have the essential skills as well as information, call a heating maintenance tech.