1 June 2021
How to Spray Paint Wood Furniture?
Do you have a bit of used wood furniture in need of a facelift? You are able to quickly upgrade cut pieces of furniture inexpensively with spray paint. Read this manual to discover how to spray paint wood in the nicest way.
Everyone has outdated cut pieces of furniture that exist in their homes: they are well made or maybe they might have sentimental value, but the color of theirs or maybe finish is outdated. Updating these cut pieces of wood furnishings with paint is low-cost and is a really fulfilling process.
How to Prepare and Spray Paint Wood
The process mentioned below for prepping, priming, and painting wood furniture is easy, straightforward, and can be problem-free, provided that every phase is performed completely and thoroughly. The reward of yours is going to be a durable, gorgeous piece of wood furniture.
Preparing for Painting
Create a suitable worksite. Prepping, priming, and painting outdoors is going to allow for excellent ventilation, though you are at the mercy of the weather condition – and bugs, other things, and dew too. Inside a garage is actually the next best choice.
Protect the floor and also some nearby things to keep them dust-free. It is also vital that you have appropriate lighting when painting in an enclosed room.
The first step involves a process known as “sand, vac & tack,” or SVT.
Sand: First, take out any loose finish from the piece by scraping and sanding areas where the existing finish is actually flaking or perhaps peeling off. Then scuff sand the whole portion of furniture gently to make the surface area a bit of “tooth” so that the brand new primer is able to adhere.
Vacuum: Use a shop vac with a brush attachment to vacuum up the dust.
Tack: Eliminate any residual dust with a dampened microfiber rag.
Steps for Spray Painting Wood Furniture
- Aerosol spray paint is easily available in a large color range and is low-cost, and very easy to operate – a modest investment for a very good outcome.
- Once the work area of yours as well as household furniture are actually prepped, spray the portion with the bonding primer. Begin by flipping the furniture on its best and spray the bottom very first.
- Begin pressing the nozzle a couple of inches before you’re over the piece, then get long, continuous passes. releasing a couple of inches after you spend the piece. Stopping and starting in the midst of the furnishings might result in lap marks and drips. Overlap each pass 30%-50%
- After the primer is actually dry, SVT only if the furniture is actually rough, otherwise begin the enameling process. The exact same basic idea applies long, constant passes for even coverage. Pro Tip: Do not attempt to “one-and-done” it. Implement a minimum of 2 coats for a high, even finish.
Using a Professional Sprayer
When you would like a really professional-looking finish, work with an experienced sprayer. You will find 2 primary kinds of pro sprayers: Airless and HVLP.
HVLP sprayers
HVLP (high volume, low pressure) utilizes a turbine to produce air pressure. The color moves right into a cup gun, and air blows by, picking up paint and sending it out the nozzle. HVLP sprayers are actually delicate, controlled devices that use a little bit of expertise to understand.
Airless sprayers
Airless sprayers are a different choice. Using no air, they pressurize the paint, sending it through a hose pipe and also tip specifically made to atomize the coating. Airless sprayers are able to use a lot more paint than HVLP sprayers what about a broader location. The capability is significantly larger – you are able to spray from a five-gallon pail in case you want.
With either sprayer, work bottom to top, long continuous passes overlapping 30 50 % each pass. You can’t match the finish with pro sprayers, though they do come with a couple of downsides, namely original cost, and cleaning. 2 entry-level pro sprayers, to begin with, are actually the Airless – Graco Magnum X5 and the HVLP – Wagner Flexio 2000.
Which Primer Works Best?
Primer option is crucial. In case you decide on the bad color, your painted finish may chip, scratch, and peel in an order that is short.
Primer could be used with an off-the-shelf aerosol rattle can, or perhaps with a sprayer. Canned off-the-shelf primer yields an excellent finish but is actually certain to pick out one labeled “bonding” or maybe “adhesion,” so that the primer binds to the wood. An option that is a terrific choice is Rust-Oleum Universal Bonding Primer.
or maybe, search for a comparable bonding or maybe adhesion primer in a quart or maybe gallon-sized container as well as make use of an HVLP (high volume low pressure) or even airless sprayer to apply. More people on the impact later on.
Pro Tip: Do a scratch test. Use a primer to a tiny area and then allow it to dry overnight. Try to scratch it all with your fingernail the following day. If nothing comes off, you’ve adhesion. When it is able to simply be scratched off, you have to find one more primer.
Best Spray Paint for Furniture
What is the greatest furniture spray paint? Enamel, a hard drying color made for furniture, trim, and cabinets, is actually a little less forgiving but a lot more appealing, long-lasting, and durable than a satin finish latex wall paint. Try Rust-Oleum Universal for aerosol application.
2 awesome picks in case you are likely to make use of a sprayer: Sherwin Williams Emerald Trim Urethane Semi-Gloss and Benjamin Moore Scuff-X Satin.